cairns ute trays

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

townsville ute traysmackay ute traysute tray backs cairns
ute tray back manufacture ute dog cages cairns ute trays cairns ute trays townsville
ute trays mackay ute tray backs mackay silverback ute tray backs nqef ute tray backs
reedmans sheetmetal
ute trays backs cairns

cairns ute tray backs

ute tray backs townsville

townsville ute tray backs

ute tray backs mackay

mackay ute tray backs

Silverback ute trays - Ute tray backs made to last

Silverback manufactures the highest quality hot-dipped galvanized products manufactured from Australian steel. Locally owned and operated by young and energetic Directors bringing a unique service to Far North Queensland.

All trays include:
Solid stainless steel latch system using galvanised and stainless steel bolts, removable front and rear load racks, robust construction, scratch resistant, hardwearing, rear tie-down points, extra deep tie rails which can fit work boots, corrosion free, fittings and lights plus light protection front and rear (optional LED lights), galvinized steel or hardwood floors (2 coated screws per board) oiled underside and top.

Options available:

ute tray backs cairns
Custom-Made Roof Racks
cairns ute trays
Lockable Tool Boxes with Rubber Seal
ute tray backs townsville
70 ltr Water Tanks
townsville ute trays
Dog cages
ute tray backs mackay
Rear load rails
mackay ute trays
Wide mud guards
silverback ute trays
Roof extentions

...Any special requirements.

Silverback Steel Ute Tray Backs are galvanised - here's why this is important for you

The use of galvanizing for structural steel protection gives you ten major, measurable benefits.

1. Lowest first cost. Galvanizing is lower in first cost than many other commonly specified protective coatings for steel. (The application cost of labour intensive coatings such as painting has risen far more than the cost of factory operations such as galvanizing.)

2. Less maintenance/Lowest long term cost. Even in cases where the initial cost of galvanizing is higher than alternative coatings, galvanizing is almost invariably cheapest in the long term (because it lasts longer and needs less maintenance). And, maintenance causes problems and adds to costs when structures are located in remote areas, and when plant shutdown or disruption to production is involved.

3. Long life. The life expectancy of galvanized coatings on typical structural members is far in excess of 50 years in most rural environments, and 20 to 25 years plus, even in severe urban and coastal exposure.

4. Reliability. Galvanizing is carried out to Australian / New Zealand Standard 4680, and standard, minimum coating thicknesses are applied. Coating life and performance are reliable and predictable.

5. Toughest coating. A galvanized coating has a unique metallurgical structure which gives outstanding resistance to mechanical damage in transport, erection and service.

6. Automatic protection for damaged areas. Galvanized coatings corrode preferentially to steel, providing cathodic or sacrificial protection to small areas of steel exposed through damage. Unlike organic coatings, small damaged areas need no touch up.

7. Complete protection. Every part of a galvanized article is protected, even recesses, sharp corners and inaccessible areas. No coating applied to a structure or fabrication after completion can provide the same protection.

8. Ease of inspection. Galvanized coatings are assessed readily by eye, and simple non-destructive thickness testing methods can be used. The galvanizing process is such that if coatings appear sound and continuous, they are sound and continuous.

9. Faster erection time. As galvanized steel members are received they are ready for use. No time is lost on-site in surface preparation, painting and inspection. When assembly of the structure is complete, it is immediately ready for use, or for the next construction stage.

10. A full protective coating can be applied in minutes; The galvanizing process is not dependent on weather conditions

silverback ute trays

Silverback ute trays Cairns
We specialise in the manufacture of quality ute trays cairns and ute tray back cairns and also ute trays Townsville and ute tray backs Townsville. We are a company that is owned and operated by North Queensland Engineering & Fabrication (NQEF)

Website designed, hosted & maintained by Allcorp Advertising © 2013


See NQEF & Silverback ute trays for

Ute trays Cairns
Ute tray backs Cairns
Ute trays Townsville
Ute tray backs Townsville
Ute trays Mackay
Ute tray backs Mackay
Cairns engineering
Cairns steel fabrication
Cairns cranes
Cairns forklifts